Vector unit with "C" axis and pneumatic oscillating head OH-150

• foam and honeycomb materials for the production of composites kevlar, aramid, dyneema
• foam materials for packaging production
• rubber and various types of sealing materials
• floor coverings (PVC, vinyl, carpet, etc.)
• cardboard and corrugated cardboard
• layered textiles (manufacture of wearing apparel and other textile products)
• nonwovens, filter materials
• leather, imitation leather

Vector unit with "C" axis and DUKANE ultrasonic converter

• rubber and various types of sealing materials
• glass and carbon prepreg

Vector unit with "C" axis and driven cutting wheel

• glass and carbon prepreg

"C" axis with head trailing knife

The trailing knife is designed for harder and hard materials, which are able to withstand the force exerted by the movement of the knife during cutting. The head is equipped with a continuously adjusted depth of cut limiter.

• cardboard and corrugated cardboard
• thin plastic plates of various types
• thin plywood
• magnetic foils
• sealing materials
• soft metals (lead, tin, zinc alloys, etc.)

Vector unit with "C" axis with trailing knife for angle cut

• cardboard and corrugated cardboard
• thin plastic plates of various types
• thin plywood
• magnetic foils
• sealing materials
• soft metals (lead, tin, zinc alloys, etc.)

"C" axis with head for rotary blades, grooving and perforating wheels

• glass and carbon fabric (roving)
• rubberized fabrics
• insulation materials
• creasing and perforating cardboard

Milling unit

The milling unit with material pressure, flexible glider and integrated suction is designed for cutting shaped parts by milling. It is possible to mill a wide range of materials (eg wood, plywood, plastic, sandwich, composite and foam boards). The high-quality high-speed spindle with stepless speed control enables the clamping of milling tools up to a diameter of 8 mm. A part of the unit is a flexible glider, with the help of which it is possible to mill materials with a thickness of 0.3 – 10 mm. This system ensures the pressure of the material on the substrate during milling and at the same time the extraction of chips from the place of cutting.

Labeling

The unit for marking pens with flexible compensation for different types of pens is used mainly for marking parts for subsequent technological procedures. High-strength ink pens are available in line thicknesses of 0.3, 0.6 and 1 mm. You can also choose from a wide range of colors.